Procedure For Frame-Covered Accessory Structures 120 Square Feet Or Smaller
In Size With A Height Of 10 Feet Or Less:
No permit required
No setback restrictions
Over 120 Square Feet Up To 200 Square Feet In Size
With A Height Of Ten Feet Or Less:
Requires a development permit
May be placed as close as three feet from the side and rear property
lines provided it does not encroach on an active utility easement
Over 200 Square Feet Up To 500 Square Feet In Size
With A Height Of Ten Feet Or Less:
Requires a development permit
Must conform to setback requirements, except that it may be placed
as close as three feet from the rear property line provided it does not
encroach on an active utility easement
Over 500 Square Feet In Size With A Height Of Ten
Feet Or Less:
Requires a building permit
The fee is based on the valuation of the structure
Must conform to setback requirements, except that it may be placed
as close as three feet from the rear property line provided it does not
encroach on an active utility easement
Must go through construction plan review process
Over 10 Feet In Height:
Requires a building permit
The fee is based on the valuation of the structure
Must conform to setback requirements of the underlying zoning